Loading Profile...
I can ́t start BumpTop cause BT is unable to initialize 3D hardware acceleration
I downloaded BumpTop but when I try to start it comes this messages up: BT is unable to initialize 3D hardware acceleration. Please update to latest drivers for your video card and relaunch BT.
I have Asus F3Jseries with Ati RADEON X2300 graphic card. Driver Version: 7.14.0010.0464 (English). I ́ve tired to update graphic card but It always failes. Is there any help for my computer. I want BT
I have Asus F3Jseries with Ati RADEON X2300 graphic card. Driver Version: 7.14.0010.0464 (English). I ́ve tired to update graphic card but It always failes. Is there any help for my computer. I want BT
1
person has this question
I have this question, too!
Tell me when someone answers.
The more people who ask this question, the more it gets noticed.
The more people who ask this question, the more it gets noticed.
The best answer from the company
-
If you have the most up-to-date drivers available for your system, it is likely that your hardware is simply not supported in BumpTop 1.0x, but should work with an upcoming update.
We have been working hard on our backend graphics engine - and we hope to have something out soon.
The company says
this answers the question
-
Inappropriate?Hi there,
Grab the ATI drivers from our drivers page, and follow the steps to manually install them.
http://bumptop.com/support/drivers.php
If this fails, post up dxdiag information and I can help you find drivers. (Start, Run, dxdiag, Save All Information)1 Comment Add a comment
This answers the question
-
Hi Justin,
I have installed bt but it gives an error "BT is unable to initialize 3D hardware acceleration"
following is the specifications of my display driver:-
System Information
------------------
Time of this report: 7/1/2009, 14:50:25
Machine name: AWAIS-PC
Operating System: Windows VistaTM Ultimate (6.0, Build 6000) (6000.vista_gdr.090302-1506)
Language: English (Regional Setting: English)
System Manufacturer: IBM
System Model: 818332U
BIOS: Phoenix FirstBios(tm) Desktop Pro Version 2.0 for IBM ThinkCentre.
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, ~2.8GHz
Memory: 1014MB RAM
Page File: 748MB used, 1533MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6000.16386 32bit Unicode
------------
Display Devices
---------------
Card name: Intel(R) 82865G Graphics Controller (Microsoft Corporation - XDDM)
Manufacturer: Intel Corporation
Chip type: Intel(R) 82865G Graphics Controller
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2572&SUBSYS_02871014&REV_02
Display Memory: 92.5 MB
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1024 x 768 (32 bit) (60Hz)
Monitor: Generic Non-PnP Monitor
Driver Name: ialmrnt5
Driver Version: 6.14.0010.4656 (English)
DDI Version: 9
Driver Attributes: Final Retail
Driver Date/Size: 11/2/2006 02:39:29, 36990 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-6632-11CF-9461-8D22A3C2CB35}
Vendor ID: 0x8086
Device ID: 0x2572
SubSys ID: 0x02871014
Revision ID: 0x0002
Revision ID: 0x0002
Video Accel:
Deinterlace Caps: n/a
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
-------------------------------------------------------
can u plz help me out. I have uploaded update driver as well. -
Inappropriate?Justin Ho can you please help me. I have the same problem here are my specs:
Card name: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Manufacturer: Intel Corporation
Driver Version: 6.14.0010.4342 (English)
Operating System: Windows VistaTM Home Premium (6.0, Build 6002) Service Pack 2 (6002.lh_sp2rtm.090410-1830) -
Inappropriate?Alex,
Post up your video card driver version from dxdiag. Start, run, dxdiag, Save All Information.
Mine looks like this (paste in the part from your file that is similar to this...)
---------------
Display Devices
---------------
Card name: ATI MOBILITY FireGL V5250
Manufacturer: ATI Technologies Inc.
Chip type: ATI MOBILITY FireGL V5250 (0x71D4)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_71D4&SUBSYS_20A417AA&REV_00
Display Memory: 1533 MB
Dedicated Memory: 254 MB
Shared Memory: 1279 MB
Current Mode: 1400 x 1050 (32 bit) (60Hz)
Monitor Name: ThinkPad Display 1400x1050
Monitor Model: unknown
Monitor Id: LEN4022
Native Mode: 1400 x 1050(p) (60.020Hz)
Output Type: Internal
Driver Name: atiumdag,atiumdva,atiumd64.dll,atiumd6a.cap,atitmm64.dll
Driver File Version: 7.14.0010.0630 (English)
Driver Version: 8.561.0.0
DDI Version: 9Ex
Driver Model: WDDM 1.0
Driver Attributes: Final Retail
Driver Date/Size: 12/1/2008 20:29:34, 4033536 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-3294-11CF-6C76-AE00A1C2CA35}
Vendor ID: 0x1002
Device ID: 0x71D4
SubSys ID: 0x20A417AA
Revision ID: 0x0000
Driver Strong Name: oem4.inf:ATI.Mfg.NTamd64:ati2mtag_M56GL:8.561.0.0:pci\ven_1002&dev_71d4
Rank Of Driver: 00F62001
D3D9 Overlay: Not Supported
DXVA-HD: Not Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled -
Inappropriate?---------------
Display Devices
---------------
Card name: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
Manufacturer: Intel Corporation
Chip type: Intel(R) 82845G Graphics Controller
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_2562&SUBSYS_01601028&REV_01
Display Memory: 60.5 MB
Dedicated Memory: n/a
Shared Memory: n/a
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Generic PnP Monitor
Driver Name: ialmrnt5
Driver Version: 6.14.0010.4342 (English)
DDI Version: 9
Driver Attributes: Final Retail
Driver Date/Size: 6/22/2005 00:04:48, 38016 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
Device Identifier: {D7B78E66-6622-11CF-6E63-6A21A0C2CB35}
Vendor ID: 0x8086
Device ID: 0x2562
SubSys ID: 0x01601028
Revision ID: 0x0001
Revision ID: 0x0001
Video Accel:
Deinterlace Caps: n/a
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available -
Inappropriate?This system is quite old - and quite a bit below our minimum system requirements.
I'm not sure if Intel has working OpenGL driver support for this board under Vista.
You can try this, but I strongly suspect you're already using this:
http://downloadcenter.intel.com/Detai... Operating Systems&lang=eng
Make sure you install the driver manually as per bumptop.com/drivers (at the bottom). -
Inappropriate?yes i am already using this
-
Inappropriate?is there anything else i can do???
-
Inappropriate?I'm afraid I don't know. We haven't tested this graphics card under Vista. Most machines with this board are old and are only running under XP.
A video card upgrade is probably the only fix for now.
The next major version of BumpTop will include better graphics performance/support with DirectX instead of just OpenGL. -
Inappropriate?ok thank you for your time
-
Inappropriate?OpenGL 2.0 support is available since Vista v15.11 drivers and XP v14.36 drivers, so anything newer should work.
Have you tried this "newer" XP driver, see if it supports your card?
http://downloadcenter.intel.com/T8Cle... -
Inappropriate?it said my computer does not meet the minimum requirements1 Comment Add a comment
This answers the question
-
Can you manually install the drivers? (Extract the archive first)
-
Inappropriate?Are you using an onboard video card? Did the manual driver install work?
I’m happy to help
-
Inappropriate?If you have the most up-to-date drivers available for your system, it is likely that your hardware is simply not supported in BumpTop 1.0x, but should work with an upcoming update.
We have been working hard on our backend graphics engine - and we hope to have something out soon.
The company says
this answers the question
-
Inappropriate?Try patching this registry:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\ati2dvag]
"Dll"="atioglxx.dll"
It worked with my x2300 try it.
EMPLOYEE
