Loading Profile...
Em100 doesnt work over full duplex network
Hello,i have a problem that i need help with.
When network adapter of laptop is configured as Auto mode the tibbo is visible via DS manager and works fine but when i try to change it to full duplex mode i lose tibbo completely
on the network.
The customer transfered from half to full duplex network and now all comunication with tibbo have stopped.
When network adapter of laptop is configured as Auto mode the tibbo is visible via DS manager and works fine but when i try to change it to full duplex mode i lose tibbo completely
on the network.
The customer transfered from half to full duplex network and now all comunication with tibbo have stopped.
I’m confused
1
person has this question
I have this question, too!
Tell me when someone answers.
The more people who ask this question, the more it gets noticed.
The more people who ask this question, the more it gets noticed.
Create a customer community for your own organization
Plans starting at $19/month
-
Inappropriate?Hi,
Our products work in auto-negotiate mode. It is not recommended to mix auto-negotiate and forced duplex mode together. The reason is that, the auto-negotiation will fail and the auto-negotiating device will default back to half-duplex.
I have test it here using my computer and forcing my NIC to operate under 10BaseT/Full-Duplex, and I connected the DS100 directly to my computer via a CAT5 cable, it will still work, but when you introduce a whole LAN a lot of collision might occur which might cause the DS100 to not operate correctly.
Another thing, make sure they are using 10BaseT not 100BaseT, DS100 only support 10BaseT.
The company and 1 other person say
this answers the question
EMPLOYEE
